Frequently Asked Questions
Can the products be applied to outside surfaces susceptible to harsh weather exposure such as; gates, fence posts, flooring, framing and doors?
– Wet sand with wet or dry paper (400-600 grit) and Chinese Wood Oil mixed in equal parts (50/50) with Chinese Wood Oil Thinners. This will assist to dissolve and cut the finish to flatten and fill.
– Steel wool “oo” grade can also be used to cut back the surface either dry or by dipping in thinned Chinese Wood Oil mixture. Make sure to refresh the steel wool regularly as worn wool will not effectively cut. Wipe hard with a lint free rag.
– Electric buffers with either a lambswool head or cotton pad are very effective at creating heat and friction to flatten and create an even finish and encourage penetration into the grain.
Our Finishing manual provides further information on all of our products and we offer an experienced advisory for all email and telephone enquiries.
Our guarantee: Constantia Organic Finishes are some of the safest, easiest to apply, longest lasting and most beautiful products on the market. They are fully backed by an expert advisory and a family of esteemed clients. Constantia have been a trusted producer in Australia since 1977.
Option 1: Sprinkle dry over freshly applied (wet) Chinese Wood Oil and/or Seedlac and rub/buff vigorously in the direction of the grain.
Option 2: Mix with even parts of Red Oil and Seedlac/Chinese Wood Oil to make a paste or slurry and apply vigorously in the direction of the grain.
Option 3: Can be used dry as a fine abrasive when “matting off” or “cutting back” finish.
Brushes used for Chinese Wood Oil can be cleaned using Mineral Turpentine Oil. Brushes used for Seedlac can be cleaned using Methylated Spirits. Only Constantia Organic Finishes Thinner should be used to thin Chinese Wood Oil and Seedlac.